Used Schwinn Cruiser Frames For Sale

Schwinn 24 inch frames can accept 26 inch wheels. If you take a visit to our gallery of finished bicycles you'll find many examples of people's different interpretations of what this bicycle can become. To be able to find a 24 inch frame that is in good shape is a rare find these days. Top tubes are 22 1/2 inches while the chain stays are 17 inches. The head tube and seat tube are one degree different from each other at 69 and 70 degrees respectfully. It is not too difficult to run a 26 inch rear wheel and the 24 inch front and exchange the front fork for a 26 inch to give you what is today's standards at 71 and 72 degrees. Feel free to inquire.

I have collected over 70 Schwinn Cruiser Frames during the last few years. I will be listing them with their serial numbers so what you see is what you get! Jepg's name gives brief description. Let's find these orphans a home! Jalon Hawk http://www.desperadocycles.com Schwinn Custom Cruiser Owner's Gallery		Schwinn 24 inch frames can accept 26 inch wheels. If you take a visit to our gallery of finished bicycles you'll find many examples of people's different interpretations of what this bicycle can become. To be able to find a 24 inch frame that is in good shape is a rare find these days. Top tubes are 22 1/2 inches while the chain stays are 17 inches. The head tube and seat tube are one degree different from each other at 69 and 70 degrees respectfully. It is not too difficult to run a 26 inch rear wheel and the 24 inch front and exchange the front fork for a 26 inch to give you what is today's standards at 71 and 72 degrees. Feel free to inquire.
24 inch
24 Inch Speedster This is a frame set that is made of the old classic Speedster or Fastback frame with Plasma welded cast head tube, bottom bracket and dropouts. Top Tube measurement is 21.5 inches Seat Tube measurement is 16 inches Chain Stay measurement is 18.5 inches.
This is a frame set that is made of the old classic Speedster or Fastback frame with Plasma welded cast head tube, bottom bracket and dropouts. I believe that it was the original 20". Top Tube measurement is 19 inches Seat Tube measurement is 14.5 inches Chain Stay measurement is 16.5 inches. To purchase click here
	The Above frame set will accept 26" wheels with no more than 1.5 inch tires and no fenders. Ideal for 24" conversion!
24 Inch
26 Inch that was originally a 3 speed.
26 Inch This fork was aligned with a Park Pro Fork tool and the headset was overhauled. Additional cost..
26 Inch
26 inch Rare straight bar, this has been repainted by previous owner with a can spray.
26 inch with 3 speed brake mount
24 inch in primer SOLD!
24 Inch with fork and headset This frame SOLD!
Pre-War Classic ready for custom work!
26 inch with original paint
26 inch Frame and fork without original paint